Hioki PW3337 Power meter, 3 ch input, DC, or 1P2W to 3P3W, or 3P4W, max. input 1000 V, 65 A, DC, or 0.1 Hz to 100 kHz, +/-0.1 % basic accuracy, direct or external current sensor input, built-in LAN and RS232C interface
- Measurement lines Single-phase 2-wires, single-phase 3-wires, 3-phase 3-wires, 3-phase 4-wires (voltage / current measurement range set for each wiring mode)
- Harmonic parameters Synchronization frequency range: 10 Hz to 640 Hz, Analysis order up to 50th
- Measurement range (*1) [Voltage] 0.15 V to 1000 V AC/DC, [Current] Direct input: 2 mA to 65 A AC/DC
- Input resistance (50/60 Hz) [Voltage] 2 MΩ, [Current] 1 mΩ or less (direct input)
- Basic accuracy (Active power) ±0.1% rdg. ±0.1% f.s. (DC), ±0.1% rdg. ±0.05% f.s. (45 Hz to 66 Hz, at Input < 50% f.s.), ±0.15% rdg. (45 Hz to 66 Hz, at 50% f.s. ≤ Input)
- Display refresh rate 5 times/s to 20 seconds (depends on average times settings)
- Frequency characteristics DC, 0.1 Hz to 100 kHz
- Functions [Rectification method] AC+DC, AC+DC Umn, AC, DC, FND, Auto-range, Average, VT or CT ratio settings, Synchronized control, MAX/MIN, or other functions
More detailed specifications and dimensions of available models are specified in data sheet. Detalii
| excl. TVA | € 5 168.00 |
| Preț cu TVA | € 6 149.92 |
| Accesibilitate | On inquiry |
| Cod produs | HIOKI_PW3337 |
Guarantee 36 months
Descriere detaliată Hioki PW3337 Power meter, 3 ch input, DC, or 1P2W to 3P3W, or 3P4W, max. input 1000 V, 65 A, DC, or 0.1 Hz to 100 kHz, +/-0.1 % basic accuracy, direct or external current sensor input, built-in LAN and RS232C interface descriere producători
Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The PW3337 series measure power on the full range of electrical equipment, from single-phase devices such as battery-driven devices and household electronics to industrial use and three-phase electrical equipment over 3 input channels. The power meters provide coverage from DC to inverter frequencies with support for voltages up to 1000 V and direct-input currents of up to 65 A, and can also measure currents of up to 5000 A using an optional current sensor.
Descărcați Hioki PW3337 Power meter, 3 ch input, DC, or 1P2W to 3P3W, or 3P4W, max. input 1000 V, 65 A, DC, or 0.1 Hz to 100 kHz, +/-0.1 % basic accuracy, direct or external current sensor input, built-in LAN and RS232C interface
Produsul este in următoarele categorii
Ar putea să vă intereseze
Produs asociat cu Hioki PW3337 Power meter, 3 ch input, DC, or 1P2W to 3P3W, or 3P4W, max. input 1000 V, 65 A, DC, or 0.1 Hz to 100 kHz, +/-0.1 % basic accuracy, direct or external current sensor input, built-in LAN and RS232C interface Accesorii recomandate
Conținut suplimentar
Oferta
Contact rapid
 |
H TEST ROMANIA SRL B-dul Cetății nr. 5-7-9 300389 Timișoara, Romania |
 |
Back office: +40 747 201 051 Vânzări și suport: +40 752 228 760 |
 |
info(at)htest.ro |