Hioki PW3336-02 Power meter, 2 ch input, DC, or 1P2W to 3P3W, max. input 1000 V, 65 A, DC, or 0.1 Hz to 100 kHz, +/-0.1 % basic accuracy, direct or external current sensor input, built-in LAN, RS232C and D/A output interface
- Measurement lines Single-phase 2-wires, single-phase 3-wires, 3-phase 3-wires, (voltage / current measurement range set for each wiring mode)
- Measurement items Voltage, Current, Active power, Apparent power, Reactive power, Power factor, Phase angle, Frequency, Efficiency, Current integration, Active power integration, Integrated time, Voltage waveform peak value, Current waveform peak value, Voltage crest factor, Current crest factor, Time average current, Time average active power, Voltage ripple factor, Current ripple factor
- Basic accuracy (Active power) ±0.1% rdg. ±0.1% f.s. (DC), ±0.1% rdg. ±0.05% f.s. (45 Hz to 66 Hz, at Input < 50% f.s.), ±0.15% rdg. (45 Hz to 66 Hz, at 50% f.s. ≤ Input)
- Display refresh rate 5 times/s to 20 seconds (depend on average times settings)
- Frequency characteristics DC, 0.1 Hz to 100 kHz
- Interfaces RS-232C / LAN standard, (-01/-03 model also includes GP-IB)
- Power supply 100 to 240 V AC, 50/60 Hz, 40 VA max.
- Included accessories Instruction manual ×1, Measurement guide ×1, Power cord ×1
More detailed specifications and dimensions of available models are specified in data sheet. Detalii
| excl. TVA | € 4 178.00 |
| Preț cu TVA | € 4 971.82 |
| Accesibilitate | On inquiry |
| Cod produs | HIOKI_PW3336-02 |
Guarantee 36 months
Descriere detaliată Hioki PW3336-02 Power meter, 2 ch input, DC, or 1P2W to 3P3W, max. input 1000 V, 65 A, DC, or 0.1 Hz to 100 kHz, +/-0.1 % basic accuracy, direct or external current sensor input, built-in LAN, RS232C and D/A output interface descriere producători
Hioki benchtop power meters and power analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The PW3336 series measure power on the full range of electrical equipment, from single-phase devices such as battery-driven devices and household electronics to industrial use and three-phase electrical equipment over 2 input channels. The power meters provide coverage from DC to inverter frequencies with support for voltages up to 1000 V and direct-input currents of up to 65 A, and can also measure currents of up to 5000 A using an optional current sensor.
Descărcați Hioki PW3336-02 Power meter, 2 ch input, DC, or 1P2W to 3P3W, max. input 1000 V, 65 A, DC, or 0.1 Hz to 100 kHz, +/-0.1 % basic accuracy, direct or external current sensor input, built-in LAN, RS232C and D/A output interface
Produsul este in următoarele categorii
Ar putea să vă intereseze
Produs asociat cu Hioki PW3336-02 Power meter, 2 ch input, DC, or 1P2W to 3P3W, max. input 1000 V, 65 A, DC, or 0.1 Hz to 100 kHz, +/-0.1 % basic accuracy, direct or external current sensor input, built-in LAN, RS232C and D/A output interface Accesorii recomandate
Conținut suplimentar
Oferta
Contact rapid
 |
H TEST ROMANIA SRL B-dul Cetății nr. 5-7-9 300389 Timișoara, Romania |
 |
Back office: +40 747 201 051 Vânzări și suport: +40 752 228 760 |
 |
info(at)htest.ro |