Keysight N2818A Differential probe -200 MHz with AutoProbe
- Wide dynamic range for various applications: ±20V differential, ±60V common mode
- High input resistance and low input capacitance for low probe loading: 1 MΩ//3.5 pF between inputs
- Direct connection to AutoProbe interface (no power supply required)
- Ideal for high-speed power measurements, digital differential buses and vehicle serial buses (CAN, LIN, FlexRay) Detalii
| excl. TVA | € 2 991.00 |
| Preț cu TVA | € 3 559.29 |
| Solicitați o ofertă | |
| Accesibilitate | On inquiry |
| Cod produs | N2818A |
Guarantee 36 months
Descriere detaliată Keysight N2818A Differential probe -200 MHz with AutoProbe descriere producători
The N2818A differential probe provides superior high-speed differential signal measurements required for today’s high-speed power measurements, vehicle bus measurements and high-speed digital system designs. The N2818A differential probe offers 10:1 attenuation setting, allowing it to be used for a broad range of applications. The probe comes with a pair of alligator clips and hook tip clips for use with large and small components in tight places. The differential probe has an input resistance of 1 M? and low input capacitance of 3.5 pF to minimize circuit loading. The N2818A probe is compatible with select InfiniiVision and Infiniium oscilloscopes with 50 ? AutoProbe interface input. The probe is powered directly by the InfiniiVision and Infiniium AutoProbe interface. For use with non-AutoProbe input oscilloscope, use the N2792A.
Descărcați Keysight N2818A Differential probe -200 MHz with AutoProbe
Tip fișier: pdfProdusul este in următoarele categorii
Ar putea să vă intereseze
Conținut suplimentar
Oferta
Contact rapid
 |
H TEST ROMANIA SRL B-dul Cetății nr. 5-7-9 300389 Timișoara, Romania |
 |
Back office: +40 747 201 051 Vânzări și suport: +40 752 228 760 |
 |
info(at)htest.ro |