Keysight N2140A Passive Probe, 10:1, 200MHz, 2-Pack

Bandwidth DC to 200 MHz
Cable length 1.3 m
Switchable 1:1 or 10:1 attenuation ratio
Input resistance of 1 MΩ (1:1) or 10 MΩ (10:1)
Maximum input of 150 Vrms CAT II (1:1) or 300 Vrms CAT II (10:1)
100 pf (1:1) of 15 pf (10:1) input capacitance
Compatible with Keysight InfiniiVision Series oscilloscopes with 1 MΩ input

excl. TVA	€ 107.00
Preț cu TVA	€ 127.33
pcs
Solicitați o ofertă
Accesibilitate	În stoc
Cod produs	N2140A

Compară produse

Guarantee 36 months

Manufacturer's product page

Descriere producători

Descriere detaliată Keysight N2140A Passive Probe, 10:1, 200MHz, 2-Pack descriere producători

The Keysight N2140A is an extremely low-cost passive probe that provides a switchable 10:1/1:1 attenuation and up to 200 MHz bandwidth. It features a high input resistance of 10 MΩ (switchable to 1 MΩ) to address a wide range of measurement needs with low probe loading. The probe can be adjusted for both low-frequency compensation and high-frequency compensation. For the best measurements, you should compensate your probe to match its characteristics to the oscilloscope. This probe is compatible with Keysight InfiniiVision Series oscilloscopes with 1 MΩ input.

Produsul este in următoarele categorii

Ar putea să vă intereseze

Oferta

Contact rapid

	H TEST ROMANIA SRL B-dul Cetății nr. 5-7-9 300389 Timișoara, Romania
	Back office: +40 747 201 051 Vânzări și suport: +40 752 228 760
	info(at)htest.ro