Keysight 6811C AC source/analyzer, 0-300 Vrms, 375 VA, single-phase. USB,LAN,GPIB,RS-232
- Maximum Output Power: 375 VA
- Maximum rms Current: 3.25 A
- Connectivity: LAN, USB, GPIB
- Maximum Peak Current: 40 A
- Maximum Frequency: 1 kHz
- DC Power Capacity: 285 W
- DC Maximum Current: 2.5 A
- Voltage Range: 300 Vrms
- DC Voltage Range: +/-425 V Detalii
| excl. TVA | € 9 947.00 |
| Preț cu TVA | € 11 836.93 |
| Solicitați o ofertă | |
| Accesibilitate | 7 weeks |
| Cod produs | 6811C |
Guarantee 36 months
Descriere detaliată Keysight 6811C AC source/analyzer, 0-300 Vrms, 375 VA, single-phase. USB,LAN,GPIB,RS-232 descriere producători
Keysight 6800C Series AC power source/analyzers provide a complete AC test solution. As AC sources, they combine the capabilities of a power amplifier and an arbitrary waveform generator. This allows you to simulate normal waveforms and many types of distorted power waveforms. The built in power analyzer combines the capabilities of a multimeter, oscilloscope, harmonic analyzer and power analyzer. These instruments may also be used to produce DC power, either alone or as a DC offset to an AC waveform.
Since your product will have to operate in the real world of unpredictable AC power, you need to design and verify its correct operation under a wide range of AC power inputs. Brownouts, dropouts, sags, and other irregularities are not unusual in many communities today. Keysight AC power source/analyzers have the features needed to easily accomplish this test goal either in an R&D environment or on the manufacturing test floor. If you plan to sell your products in a worldwide market, you will also need to test them at the line voltages and frequencies for which they will eventually operate. There is also additional testing needed to meet regulatory requirements for sale into some countries.
Keysight AC power source/analyzers offer a complete solution for AC power testing, helping you to simplify this important task. These instruments combine the features of a power amplifier and arbitrary waveform generator to give you the ability to do all of the tests that you need. There are many standard preprogrammed waveforms, or you can use the transient generation system to simulate sophisticated and repeatable AC line disturbances. DC power can also be generated, either as a DC offset or as a pure DC signal.
Descărcați Keysight 6811C AC source/analyzer, 0-300 Vrms, 375 VA, single-phase. USB,LAN,GPIB,RS-232
Tip fișier: pdfProdusul este in următoarele categorii
Ar putea să vă intereseze
Produs asociat cu Keysight 6811C AC source/analyzer, 0-300 Vrms, 375 VA, single-phase. USB,LAN,GPIB,RS-232 Accesorii recomandate
Conținut suplimentar
Oferta
Contact rapid
 |
H TEST ROMANIA SRL B-dul Cetății nr. 5-7-9 300389 Timișoara, Romania |
 |
Back office: +40 747 201 051 Vânzări și suport: +40 752 228 760 |
 |
info(at)htest.ro |