Acasă
Sarcini
Sarcini electronice Aim-TTi
AIM-TTI_LDH400P Electronic DC Load, 500V, 16A, 400W with analogue and digital control, USB, RS232, LAN (LXI) and GPIB
AIM-TTI_LDH400P Electronic DC Load, 500V, 16A, 400W with analogue and digital control, USB, RS232, LAN (LXI) and GPIB
- Versatile solution for direct testing of dc power sources and PFCs
- Constant current, resistance, conductance and power modes
- Wide voltage and current range, 10 to 500V and 0 to 16A
- 400 watts continuous dissipation at 28°C (360W at 40°C)
- High resolution and accuracy for level setting
- Built-in transient generator with variable slew
- Current monitor output for waveform viewing
- Variable drop-out voltage for battery testing
- High resolution backlit graphic LCD with soft key control
- Analogue remote control of levels and TTL control of on/off and transient switching
- Front and rear input terminals
- Load inputs rated to CAT II (300V)
- Full bus control via USB, RS232, GPIB and LXI compliant LAN interfaces Detalii
| excl. TVA | € 1 768.00 |
| Preț cu TVA | € 2 103.92 |
| Solicitați o ofertă | |
| Accesibilitate | On inquiry |
| Cod produs | AIM-TTI_LDH400P |
Guarantee 36 months
Descriere detaliată AIM-TTI_LDH400P Electronic DC Load, 500V, 16A, 400W with analogue and digital control, USB, RS232, LAN (LXI) and GPIB descriere producători
Adding to the LD400 series, the LDH400 series offers ranges from 10 to 500V and from 0 to 16A, 400W.
The LDH400P load inputs are rated to CAT II (300V), this allows the direct testing of PFCs and mains connected power supplies to be simplified by eliminating the need for an isolation transformer, saving bench space and cost.
The LDH400P offers full bus control via USB, RS232, GPIB and LXI compliant LAN interfaces, as well as analogue inputs. An IVI driver is supplied for Windows applications such as LabVIEW, LabWindows and KeysightVEE.
Descărcați AIM-TTI_LDH400P Electronic DC Load, 500V, 16A, 400W with analogue and digital control, USB, RS232, LAN (LXI) and GPIB
Tip fișier: pdfProdusul este in următoarele categorii
Ar putea să vă intereseze
Accesorii pentru AIM-TTI_LDH400P Electronic DC Load, 500V, 16A, 400W with analogue and digital control, USB, RS232, LAN (LXI) and GPIB
Produs asociat cu AIM-TTI_LDH400P Electronic DC Load, 500V, 16A, 400W with analogue and digital control, USB, RS232, LAN (LXI) and GPIB Accesorii recomandate
Conținut suplimentar
Oferta
Contact rapid
 |
H TEST ROMANIA SRL B-dul Cetății nr. 5-7-9 300389 Timișoara, Romania |
 |
Back office: +40 747 201 051 Vânzări și suport: +40 752 228 760 |
 |
info(at)htest.ro |