Aim-TTI MX180T Bench/System DC Power Supply, Multi-Range, Digital Control 378W, three full-performance outputs, 2 x 180 watts plus 1 x 18 watts, No Interfaces
MX Series
- Three high performance outputs each with full functionality
- Range switching gives variable voltage/current combinations
- Shared power mode provides double power from a single output
- Low output noise and ripple via linear final regulation
- High setting resolution of up to 1mV and 0.1mA
- Variable OVP and OCP trips on all outputs
- 50 setting memories per output plus 50 linked memories
- Numeric or spin-wheel control of all parameters
- GPIB, RS-232, USB and LAN (LXI) interfaces (-P models)
- Duplicate power & sense terminals at rear (-P models)
- Individual or combined output on/off control with programmable delay sequencing.
- 3U half-rack case for bench or rack mounting Detalii
| excl. TVA | € 1 173.00 |
| Preț cu TVA | € 1 395.87 |
| Solicitați o ofertă | |
| Accesibilitate | On inquiry |
| Cod produs | AIM-TTI_MX180T |
Guarantee 36 months
Descriere detaliată Aim-TTI MX180T Bench/System DC Power Supply, Multi-Range, Digital Control 378W, three full-performance outputs, 2 x 180 watts plus 1 x 18 watts, No Interfaces descriere producători
The MX Series represents a new generation of multiple output laboratory power supplies from Aim-TTi. Offering high power within a compact format they use ranged switched mixed-mode regulation with display and control via a large backlit graphic LCD with soft keys..
All outputs of an MX Series power supply have fully variable voltage and current setting and are able to operate in both constant voltage and constant current modes. High resolution metering is incorporated and variable OVP and OCP trips are provided. Each output has its own DC On/Off switch.
To provide its impressive power density the MX series combines high frequency switch-mode pre-regulation with linear post-regulation to offer performance that comes close to that of an all-linear design. Excellent line and load regulation is matched by low noise and good transient response.
The MX100T differs from most other triple output power supplies in having three outputs of equal power, each with the ability to provide 35V at 3A. Each output features CV or CI operation, simultaneous high resolution metering, switchable remote sense, and an individual output switch.
Descărcați Aim-TTI MX180T Bench/System DC Power Supply, Multi-Range, Digital Control 378W, three full-performance outputs, 2 x 180 watts plus 1 x 18 watts, No Interfaces
Tip fișier: pdfProdusul este in următoarele categorii
Ar putea să vă intereseze
Accesorii pentru Aim-TTI MX180T Bench/System DC Power Supply, Multi-Range, Digital Control 378W, three full-performance outputs, 2 x 180 watts plus 1 x 18 watts, No Interfaces
Produs asociat cu Aim-TTI MX180T Bench/System DC Power Supply, Multi-Range, Digital Control 378W, three full-performance outputs, 2 x 180 watts plus 1 x 18 watts, No Interfaces Accesorii recomandate
Conținut suplimentar
Oferta
Contact rapid
 |
H TEST ROMANIA SRL B-dul Cetății nr. 5-7-9 300389 Timișoara, Romania |
 |
Back office: +40 747 201 051 Vânzări și suport: +40 752 228 760 |
 |
info(at)htest.ro |