Hioki ST5540 Leak Current HiTester, for both medical- and general-use electrical devices, built-in support for all networks, support for rated currents of up to 20 A, support for automatic testing on production lines
- Measurement methods Measurement of voltage drop across body simulated resistance points, Calculation and display of current values, True rms measurement, Measurement unit floats relative to instrument ground.
- Measurement modes Leak current measurement, voltage measurement, safety conductor current measurement
- Leak current measurement Ground leak current, 3 types of contact current, 7 types of patient leak current, patient measurement current, 4 types of total patient leak current, free current measurement, 3 types of enclosure leak current
- Measurement current DC, AC (true rms, 0.1 Hz to 1 MHz), AC+DC (true rms, 0.1 Hz to 1 MHz), AC peak (15 Hz to 1 MHz)
- Measurement ranges DC / AC / AC+DC mode: 50.00 mA/ 5.000 mA/ 500.0 μA/ 50.00 μA. AC peak mode: 75.0 mA/ 10.00 mA/ 1.000 mA/ 500.0 μA
- Interfaces External I/O, medical device relay output, USB 1.1 (communications), RS-232C
- Functionality 110% voltage application, automatic test, data storage for 100 target devices, clock, data backup, printed output (optional), etc.
- Power supply 100/120/220/240 V AC (specify at time of order), 50/60 Hz, 30 VA rated power
- Target device power supply input 100 to 250 V AC, 50/60 Hz Rated current input from terminal block: 20 A
- Target device power supply output Output from terminal block: 20 A Output from outlet: 15 A
More detailed specifications and dimensions of available models are specified in data sheet. Detalii
| excl. TVA | € 4 178.00 |
| Preț cu TVA | € 4 971.82 |
| Accesibilitate | On inquiry |
| Cod produs | HIOKI_ST5540 |
Guarantee 36 months
Descriere detaliată Hioki ST5540 Leak Current HiTester, for both medical- and general-use electrical devices, built-in support for all networks, support for rated currents of up to 20 A, support for automatic testing on production lines descriere producători
To ensure the safe use of electrical products, electrical safety tests such as insulation resistance, withstand voltage, ground resistance, and leakage current must always be conducted. Hioki Leakage Current Testers comply with laws and standards regarding medical electrical equipment as well as non-medical electrical equipment, and can be used to measure leakage current in all types of electrical products from computers to medical equipment. The ST5540 consists of measurement networks that simulate the human body and a high-frequency volt meter, and is also capable of switching power supply polarities and making measurements under simulated single fault conditions in equipment under test.
Descărcați Hioki ST5540 Leak Current HiTester, for both medical- and general-use electrical devices, built-in support for all networks, support for rated currents of up to 20 A, support for automatic testing on production lines
Produsul este in următoarele categorii
Ar putea să vă intereseze
Produs asociat cu Hioki ST5540 Leak Current HiTester, for both medical- and general-use electrical devices, built-in support for all networks, support for rated currents of up to 20 A, support for automatic testing on production lines Accesorii recomandate
Conținut suplimentar
Oferta
Contact rapid
 |
H TEST ROMANIA SRL B-dul Cetății nr. 5-7-9 300389 Timișoara, Romania |
 |
Back office: +40 747 201 051 Vânzări și suport: +40 752 228 760 |
 |
info(at)htest.ro |