+40 75 222 8760

Coșul de cumpărături este gol

Acasă Sonde Sonde de curent Sonde de curent de la Hioki Hioki CT6904A AC/DC Current sensor, frequency bandwidth: DC to 4 MHz, 500 A AC/DC (amplitude), DC to 1 MHz (phase), 32 mm core diameter, 500 A AC/DC Rated, ME15W terminal, automoatic sensor detection

Hioki CT6904A AC/DC Current sensor, frequency bandwidth: DC to 4 MHz, 500 A AC/DC (amplitude), DC to 1 MHz (phase), 32 mm core diameter, 500 A AC/DC Rated, ME15W terminal, automoatic sensor detection

Hioki CT6904A AC/DC Current sensor, frequency bandwidth: DC to 4 MHz, 500 A AC/DC (amplitude), DC to 1 MHz (phase), 32 mm core diameter, 500 A AC/DC Rated, ME15W terminal, automoatic sensor detection

     
  • Rated current 500 A AC/DC
  • Max. allowable input Within the derating range, However, up to ±1000 A peak is allowable if within 20 ms. (design value)
    •  
  • Frequency bandwidth Amplitude: DC to 4 MHz (CT6904A), DC to 2 MHz (CT6904A-1), Phase: DC to 1 MHz
    •  
  • Linearity ±5 ppm Typical (23°C)
    •  
  • Offset voltage ±10 ppm Typical (23°C), no input)
    •  
  • Output voltage rate 4 mV / A rated (This device outputs AC+DC voltage via the Sensor Unit)
  • Core diameter φ 32 mm
  • Max. rated power 7 VA Max. (500 A/55 Hz measurement, with a power supply of ±12 V)

More detailed specifications and dimensions of available models are specified in data sheet. Detalii

Alte produse din categoria
excl. TVA € 5 498.00
Preț cu TVA € 6 542.62
 pcs
Accesibilitate On inquiry
Cod produs HIOKI_CT6904A

Guarantee 36 months

Manufacturer's product page

Descriere detaliată Hioki CT6904A AC/DC Current sensor, frequency bandwidth: DC to 4 MHz, 500 A AC/DC (amplitude), DC to 1 MHz (phase), 32 mm core diameter, 500 A AC/DC Rated, ME15W terminal, automoatic sensor detection descriere producători

Hioki's pass-through type AC/DC current sensors can be connected directly to Hioki Power Analyzers and Memory HiCorders. Also, it can be connected to Power Meters, Oscilloscopes, DMMs, etc. by using an optional sensor unit. The CT6904A has a frequency bandwidth of DC to 4 MHz (Model CT6904A-1 is DC to 2 MHz) and a rated current of 500 A. It is used in research and development fields such as loss measurement of high-frequency reactors, wireless charging systems, and EV inverter motors.

Înapoi la începutul paginii

Aratădescărcați fișiere: »

Descărcați Hioki CT6904A AC/DC Current sensor, frequency bandwidth: DC to 4 MHz, 500 A AC/DC (amplitude), DC to 1 MHz (phase), 32 mm core diameter, 500 A AC/DC Rated, ME15W terminal, automoatic sensor detection

Hioki Current Sensor, Probe Series Brochure

Înapoi la începutul paginii

Aratădescriere producători »

Produsul este in următoarele categorii