+40 75 222 8760

Coșul de cumpărături este gol


Acasă Surse de alimentare DC Surse de alimentare DC Elektro-Automatik PSI 10000 3U Elektro-Automatik PSI_10500_90_3U DC power supply 0...500V_0...90A_15000W

Elektro-Automatik PSI_10500_90_3U DC power supply 0...500V_0...90A_15000W

    PSI-10000 3U Series features:

  • Wide range input, 208 V - 480 V +-10 % 3ph AC
  • Active Power-Factor-Correction, typical 0.99
  • Very high efficiency up to 96 %
  • High performance of up to 15 kW per unit
  • Voltage from 0 - 60 V up to 0 - 2000 V
  • Currents from 0 - 20 A up to 0 - 510 A
  • Flexible power regulated DC output stages (autoranging)
  • Regulation mode CV, CC, CP, CR with fast crossover
  • Digital regulation, high resolution with 16bit ADCs and DACs, selection of control speed: Normal, Fast, Slow
  • Color 5“ TFT display with touch control and intuitive user interface
  • Galvanically isolated Share-Bus for parallel operation of all power classes in the 10000 series
  • Master-Slave bus for parallel operation of up to 64 units of all power classes in the 10000 series
  • Integrated function generator with predefined curves
  • Predefined automotive test procedures for LV123, LV124 and LV148
  • Command languages and drivers: SCPI and ModBus, LabVIEW, IVI
  • Built-in interfaces: USB, Ethernet, Analog, USB Host, Master-Slave-Bus, Share-Bus
  • Detalii

excl. TVA € 13 900.00
Preț cu TVA € 16 541.00
 pcs
Solicitați o ofertă
Accesibilitate On inquiry
Cod produs EA_PSI_10500_90_3U

Guarantee 24 months

Descriere detaliată Elektro-Automatik PSI_10500_90_3U DC power supply 0...500V_0...90A_15000W descriere producători

The DC laboratory power supplies in the PSI 10000 series from EA Elektro-Automatik convert the energy from the grid into a regulated DC voltage with an efficiency of over 96%.

The PSI 10000 series includes single and three phase units, which, together with the wide input range, allows use with practically all global mains voltages. The DC voltage and current are directed by the application and the spectrum ranges from 0 - 60 V to 0 - 2000 V and from 0 - 6 A up to 0 - 1000 A in a single device. The DC supply operates as a flexible output stage with a constant power characteristic (autoranging), and a wide voltage, current and power range. To achieve higher power and current all units are equipped with a master-slave bus. This enables up to 64 parallel connected devices to be combined into one system which can provide up to 1920 W and 64000 A. Such a system works as a single unit and can use different power classes, only the voltage class must remain constant. In this way a user can construct a 75 kW system from two 30 kW and one 15 kW devices from the PSI 10000 range.

Furthermore, typical laboratory functionality is provided. This includes an extensive function generator, alarm and warning management, assorted interfaces and ports, software solutions and many more functions.

Înapoi la începutul paginii

Aratădescărcați fișiere: »

Descărcați Elektro-Automatik PSI_10500_90_3U DC power supply 0...500V_0...90A_15000W

Typ souboru: pdf Tip fișier: pdf

Înapoi la începutul paginii

Aratădescriere producători »

Accesorii pentru Elektro-Automatik PSI_10500_90_3U DC power supply 0...500V_0...90A_15000W